Outdoor Noise Kit: CK685B For Environmental Noise with 3G/GPRS & GPS location data (Excludes Tripod)

The CK:670 and CK:680 measurement kits are compatible with the following Optimus Green sound level meters:

Class 1

• CR:1710 Class 1 Optimus Green Sound Level Meter
  
• CR:171A Class 1 Optimus Green Sound Level Meter
  
• CR:171B Class 1 Optimus Green Sound Level Meter
  
• CR:171C Class 1 Optimus Green Sound Level Meter
  

Class 2

• CR:1720 Class 2 Optimus Green Sound Level Meter
  
• CR:172A Class 2 Optimus Green Sound Level Meter
  
• CR:172B Class 2 Optimus Green Sound Level Meter
  
• CR:172C Class 2 Optimus Green Sound Level Meter
  

The CK:685 outdoor noise kit is suitable for use with the Optimus Green sound level meters and provides you with a complete outdoor noise measurement solution for environmental and community noise monitoring.

Protection for your sound level meter & microphone

The CK:685 outdoor noise kit has been designed to protect the sound level meter and the microphone capsule from adverse weather and other contaminents that may affect the measurements.

The windshield on the outdoor microphone has a protective coating which allows it to resist rain.

The robust, lockable case contains the sound level meter and a battery pack capable of powering the instrument for 5 days. A further battery pack can be added quickly to extend the operation to 12 days and the battery packs can be hot-swapped for uninterrupted operation.

Remote data download & GPS location

The internal modem in the CK:685 kit allows the optimus to communicate with the NoiseTools software remotely over a 3G/GPRS connection.

The instrument can be configured remotely and measurement data downloaded into the NoiseTools database.

This can also be used by the Optimus to send alerts via SMS, Email and/or Twitter when the Acoustic Fingerprint™ detection templates are triggered.

The CK:685 also contains GPS system which allows the position of the noise measurement to be recorded and stored with the noise data. The GPS signal is also used to ensure that the clock in the sound level meter is accurate.

Please note this does not include CT:9 Tripod