// MS UET

Sensepoint with Junction Box

Certification

Ex II 2 G D EExd IIC Ex II 2 G D EExd ia IIC Ex II 2 G D EExe II
T6 T85 Deg C T4 T135 Deg C T6 T85 Deg C
Tamb = -55°C to +55°C Tamb = -55°C to +65°C Tamb = -40°C to +50°C
BAS98ATEX2156X BAS98ATEX2157X SIRA04ATEX3018
SIRA03ATEX1116X

Applicable Standards

This product complies with the relevant CE standards including:
EMC to EN50270, Flammable to EN50054, Toxic to EN445544 (H2S only)


Environmental

IP Rating IP65 standard, IP66 with weather protection in accordance with EN60529:1992
Operating Temperature Dependent upon gas type and certification
Operating Humidity Range Continuous: 20-90%RH (non condensing), Intermittent: 10-99%RH (non condensing)
Operating Pressure 90-110kPa
Storage Conditions Instrument -40°C to +50°C (-40°F to +122°F)

The Sensepoint range of flammable, toxic and oxygen gas detectors
offer users a low cost solution to their gas monitoring needs, in or out of
doors and even in potentially explosive atmospheres (ATEX approval only).
Note: the flammable sensor is certified to +50°C only (Sensepoint HT
for higher temp ranges). Supplied with a pre-wired junction box, the
detector can be installed using conduit or armoured cable and glands
depending on individual site standards.
The junction box includes a hinged lid to ensure both hands are free to
complete electrical connections. Threaded M20 as well as ¾” and ½” NPT
clearance entries are included as standard, each one fitted with an
appropriate seal, so enabling the user to select the most convenient entry
size to use.
All Sensepoint gas detectors are pre-configured at the factory and designed for use with Honeywell gas detector controllers.

Product Details

  • Brand: Honeywell
  • Product Code: Sensepoint with Junction Box
  • Availability: Call for availability

Product Downloads

  • £POA


Available Options


Tags: Honeywell Sensepoint